| Steel Heads |
 |
- Steel Head c/w metal and neoprene washers
- Available in 1", 11/2", 2", 21/2 ", and 3" lengths
Principle Use: Attaching 26-29 gauge steel panels to wood
frame structural member |
 |
- Steel Head c/w metal and neoprene washers
- Available in 1", 11/2”, and 2" lengths
Principle Use: Attaching wall and roof light gauge panels to
structural wood members |
 |
- Steel Head c/w metal and neoprene washers
- Available in 7/8" lengths
Principle Use: Side lap stitching of 18-29 gauge steel panels |
 |
- Steel Head - Available in 1" lengths
- Available with or without metal and neoprene washers
Principle Use: Attaching wall and roof panels to subgirts |
 |
- Stainless Screws - Painted White
- Available in 3/4 " lengths
Principle Use: Installing steel or plastic liner panels to wood
purlins |
 |
- Steel Head no washers
- Available in 3/4 ” lengths
Principle Use: Installing steel or plastic liner panels to wood
purlins |
 |
- Steel Head no washer
- Available in 1" lengths - Philips Drive
Principle Use: Installing hidden fastener panels into wood |
 |
- Steel Head no washers
- Available in 1" Lengths - Philips Drive
Principle Use: Installing hidden fastener panels to subgirts |
 |
- Steel Head with washers
- Available in 1 1/4 ” lengths
Principle Use: Allows fastening on non-metal Liner Panels
without pre-drilling to allow for expansion and/or
contraction |
 |
- Steel Head no washers
- Available in 3/4 ” lengths
Principle Use: Installing light gauge steel trims/flashings to
wood |
| |
|
| Nylon Heads |
 |
- Nylon Head - c/w washer
- Available in 1" and 2" lengths
Principle Use: Attaching 26-29 gauge steel panels to wood |
 |
- Nylon Head - c/w washers
- Available in 1" and 13/8” lengths
Principle Use: Attaching wall and roof panels to subgirts |
 |
- Nylon Head c/w washer
- Available in 7/8 ” lengths
Principle Use: side lap stitching of 18-29 gauge steel panels |
| |
|
