|
VENTILATORS |
MODEL 1200 - 10' ROOF LINE RIDGE VENTILATOR |
- Manufacture from G90 - 8000 Series 29 Gauge Prepainted steel
- Low profile appearance rising only 3½” above roof line
- 2¾” throat opening providing 170 sq. in. free area per unit
- Each unit will ventilate 700 square feet of attic space when used in conjunction with vented soffit
- Filter installed to keep snow, rain and insects out of attic
- Snow and rain deflector part of roof flange w/drain holes
- Each unit is shipped completely assembled
- Vents with pitch greater than 6/12" - a deflector flange kit is recommended
- APPLICATION: Attic ventilation for agricultural, commercial and residential
buildings
|
| |
|
|
| MODEL 480 - 4' LOW PROFILE ROOF VENTILATOR |
- Low profile appearance
- 8" throat opening providing 288 sq. in. free area per unit
- Will ventilate attic of building up to 300' wide when installed continuous
- Bird screen attached
- Chain operated damper optional
- APPLICATION: Attic ventilation for agricultural, commercial and residential buildings
|
 |
| |
MODEL 2400 – 10’ ROOFLINE RIDGE VENTILATOR ( BIRD-PROOF ) |
- Allows up to 340 square inches of free air movement
- Bird – Proof yet has no screen to rattle, deteriorate or clog
- Weather proof flashings included for either continuous coverage of ridge or individual installation.
- Streamline appearance compliments roof line
- Manufactured from G-90 Galvanized Steel in both plain and prepainted for maximum strength and durability
- Installation is quick and easy
- Packed individually and light weight (25 lbs.)
- Assembled complete with Stainless Steel Rivets
- Available in a wide variety of colours for immediate delivery
- Additional colours available upon request
|
 |
| |
10' COMMERCIAL VENTILATOR |
| |
- Manufactured from G-90 8000 Series 24 Gauge prepainted steel
- Fully assembled complete with bird screen & hardware
- Connector brackets included for continuous runs
- 9" or 12" throat openings
- Crated for shipment
- Single usage - with or without damper
- Series usage (6 units) with dampers can be opened or closed with a cable and
winch system (all dampers connected)
- Dampers are connected to a metal bar and lever arms.
|
|
|
| |
| |
|
| |
